Majestic Solution’s SHIELD PREP WASH is a unique high pH blend of quality concentrated detergents/surfactants formulated to easily emulsify and remove a wide range of surface contamination. Road film, bug spatter, bird droppings, road salts, light road tar, waxes and oils are easily removed without damaging the surface. SHIELD PREP WASH is an essential part of the decontamination process prior to installing SHIELD Ceramic Coatings.

• A unique high pH detergent wash
• Emulsifies and easily removes surface contamination such as road film, bug spatter, bird droppings, road salt, light road tar, waxes and oils
• Highly concentrated dilutions up to 150:1
• Use with bucket wash or foam cannon device
• An essential step in the decontamination process prior to installing SHIELD Ceramic Coatings

DIRECTIONS:
Directions with the Foam Cannon: Dilute SHIELD PREP WASH 10 to 20 ounces per container based on water volume and pressure of your mechanical pump. Spray foam to vehicle. Do NOT allow to dry on surface. Wash with a dedicated Majestic Solution’s microfiber mitt followed by thoroughly rinsing the vehicle free of all soap solution. Make sure vehicle is completely dry utilizing a Mechanical blow drying device or hand dry with a Majestic Solution’s Microfiber Super Towel. The Foam Cannon is the recommended device for application.

Directions by Hand: Depending on water and soil conditions, use 10 to 25 ounces in a 3-5 gallon dedicated wash bucket. Pre-rinse vehicle. Wash with a dedicated Majestic Solution’s microfiber mitt using a 2 bucket system containing Grit Guards. Do NOT allow to dry on surface. Thoroughly rinse the entire vehicle free of all soap solution. Make sure vehicle is completely dry utilizing a Mechanical blow drying device or hand dry with a Majestic Solution’s Microfiber Super Towel.

NOTE: Do not apply SHIELD PREP WASH in direct sunlight or to a hot surface. Do not allow to dry on surface.